What Are the OSHA Eye Wash Station Requirements?

osha eye wash station requirements

In the blink of an eye, a workplace accident can change a worker's life forever. Chemical splashes, airborne particles, or accidental exposures to hazardous materials can cause severe eye injuries, potentially leading to permanent vision loss. For instance, in 2020, the U.S. Bureau of Labor Statistics reported over 18,510 eye-related injury or illness cases that resulted in at least one day away from work.

Adhering to standards and requirements for eyewash stations is about preserving workers' sight and safety. In this article, we'll explore the Occupational Safety and Health Administration (OSHA) requirements for eyewash stations, providing essential information for employers and safety professionals to ensure your workplaces are equipped to handle eye-related emergencies effectively.

 

Key Takeaways

  • OSHA requires eye wash stations to be accessible within 10 seconds of hazardous areas, which is generally interpreted as approximately 55 feet, though this may vary depending on obstacles and facility layout.
  • Eye wash stations must provide a minimum water flow of 0.4 gallons per minute for at least 15 minutes, deliver tepid water between 60°F and 100°F, and feature hands-free operation that activates in one second or less.
  • Regular maintenance and inspection of eye wash stations are crucial, including weekly activation of plumbed stations, monthly checks of portable stations, and annual thorough evaluations of all components.
  • Employers must provide comprehensive training on the use of eye wash stations, covering their locations, proper activation and use, and procedures for seeking additional medical attention.

 

What Are the OSHA Requirements for Eye Wash Stations?

The Occupational Safety and Health Administration (OSHA) has established specific eyewash station requirements to protect workers from potential eye injuries caused by exposure to hazardous materials. The primary standard governing these requirements is 29 CFR 1910.151(c), which states:

 "Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use."

While this standard provides a general overview, OSHA often refers to the more detailed ANSI/ISEA Z358.1-2014 standard for specific guidelines on eye wash station requirements. This comprehensive standard outlines the minimum performance and use requirements for emergency eyewash and shower equipment.

Key OSHA eyewash requirements include:

  • Accessibility within 10 seconds of hazardous areas
  • Proper signage and visibility
  • Hands-free operation
  • Suitable water flow and temperature
  • Regular maintenance and inspection

 

When and Where Are Eye Wash Stations Required?

Eye wash stations are required in workplaces where employees may be exposed to hazardous materials that can cause eye injuries. Some common industries and areas where OSHA eye wash station requirements apply include:

  • Chemical manufacturing and handling facilities
  • Laboratories
  • Battery charging and maintenance areas
  • Healthcare settings
  • Construction sites with potential chemical exposures

According to OSHA eyewash requirements, stations must be located within a 10-second travel time from potential hazard areas. This is generally interpreted as approximately 55 feet, though the actual distance may vary depending on obstacles and the facility's layout. The key is to ensure that employees can quickly access the station in case of an emergency.

 

What Types of Eye Wash Equipment Are Considered Suitable?

OSHA recognizes two main types of eye wash equipment:

  1. Plumbed stations: Permanently connected to a potable water supply
  2. Self-contained portable stations: Gravity-fed or pressurized units

Both types must meet specific criteria to be considered suitable under OSHA eye wash station requirements:

  • Provide a minimum water flow of 0.4 gallons per minute for at least 15 minutes
  • Deliver tepid water (between 60°F and 100°F)
  • Feature hands-free operation that activates in one second or less
  • Have nozzles protected from airborne contaminants

Below is a comparison of plumbed and portable eye wash stations:

Feature Plumbed Stations Portable Stations
Water Supply Continuous Limited Capacity
Installation Permanent Flexible Placement
Maintenance Regular Flushing Solution Replacement

Best For

Fixed Locations Temporary Worksites

How Should Eye Wash Stations Be Installed and Maintained?

Proper installation and maintenance are crucial to meeting OSHA eye wash station requirements:

Installation:

  • Height: Nozzles should be 33-53 inches above the floor
  • Placement: Unobstructed path, on the same level as the hazard
  • Signage: Highly visible signs identifying the station's location

Maintenance:

  • Weekly activation to ensure proper operation and flush lines
  • Regular cleaning of nozzles and bowls
  • Inspection of water quality and temperature
  • Annual thorough evaluation of all components

Employers should maintain detailed records of all inspections and maintenance activities to demonstrate compliance with OSHA eyewash requirements.

 

What Are the Specific Requirements for Eye Wash Station Water?

The water used in eye wash stations must meet specific criteria to ensure effective and safe use:

  • Tepid temperature: Between 60°F and 100°F (15.6°C to 37.8°C)
  • Potable quality: Free from contaminants and safe for eye flushing
  • Continuous flow: Capable of delivering water for at least 15 minutes
  • Sufficient volume: Minimum flow rate of 0.4 gallons per minute

Maintaining the proper water temperature is crucial, as water that is too cold or too hot can exacerbate eye injuries or discourage users from completing the full 15-minute flush.

 

How Often Should Eyewash Stations Be Inspected According to OSHA?

To ensure compliance with OSHA eye wash station requirements, regular inspections are essential:

  • Weekly: Activate plumbed stations to verify proper operation and flush lines
  • Monthly: Check portable stations for proper fluid levels and condition
  • Annually: Conduct a thorough evaluation of all components and overall performance

Documentation of these inspections is crucial for demonstrating compliance with OSHA eyewash requirements. Employers should maintain records of:

  • Inspection dates and times
  • Person conducting the inspection
  • Any issues identified and corrective actions taken
  • Water temperature and flow rate measurements

Regular flushing of eyewash stations is particularly important to prevent the growth of harmful microorganisms like Acanthamoeba, Pseudomonas, and Legionella, which can cause serious eye infections.

 

How Do Eye Wash Requirements Differ Across Industries?

While the basic OSHA eye wash station requirements apply across all industries, there may be some specific variations:

General Industry:

  • Covered by 29 CFR 1910.151(c)
  • Applies to most non-construction workplaces

Construction Industry:

  • Covered by 29 CFR 1926.50(g)
  • May have additional requirements for mobile or temporary work sites

Special considerations:

  • Battery charging areas: Stations must be within 25 feet
  • Research laboratories: Additional requirements for HIV and HBV research facilities

Employers should consult industry-specific OSHA standards and guidelines to ensure full compliance with eyewash station requirements relevant to their operations.

 

What Employee Training Is Required for Eye Wash Stations?

To meet OSHA eyewash requirements, employers must provide comprehensive training on the use of eye wash stations. This training should cover:

  1. Location of all eye wash stations in the facility
  2. Proper activation and use of the equipment
  3. The importance of flushing eyes for the full 15-minute duration
  4. Procedures for seeking additional medical attention after using the station
  5. Reporting and documentation requirements for eye wash station use

Regular refresher training should be provided to ensure all employees remain familiar with the proper use of eye wash stations.

 

How Many Eye Wash Stations Are Required in a Facility?

The number of eye wash stations required depends on several factors:

  • Facility size and layout
  • Number of potential hazard areas
  • Employee count and distribution

While OSHA does not specify an exact number, the key is to ensure that all employees can reach an eye wash station within 10 seconds of any potential hazard. This often results in multiple stations being necessary for larger facilities or those with numerous hazard areas.

 

What Are the Consequences of Non-compliance With OSHA Eye Wash Requirements?

Failing to meet OSHA eye wash station requirements can result in serious consequences:

  1. OSHA citations and fines: Penalties can be substantial, especially for repeat violations
  2. Increased risk of workplace injuries: Inadequate eye wash facilities may lead to more severe eye injuries
  3. Legal liability: Non-compliance may expose employers to lawsuits from injured employees
  4. Reputational damage: Safety violations can harm a company's public image and employee morale

 

How Can Employers Ensure Ongoing Compliance?

To maintain compliance with OSHA eyewash requirements, employers should:

  • Implement a comprehensive eye wash station management program
  • Conduct regular inspections and maintain detailed records
  • Provide ongoing employee training on eye wash station use
  • Stay informed about updates to OSHA standards and industry best practices
  • Foster a culture of safety that prioritizes proper use and maintenance of eye wash stations

By following these guidelines and maintaining a proactive approach to safety, employers can ensure they meet all OSHA eye wash station requirements and provide a safer work environment for their employees.

 

TRADESAFE specializes in premium industrial safety solutions, including Lockout Tagout Devices, Eyewash Stations, and more. Our products are precision-engineered to exceed safety standards, ensuring superior protection and reliability.


Tags:
Basic Ladder Safety Rules: Dos and Don’ts

How to Become an Electrician? Skills, Courses, and Requirements for Electrical Work

Herbert Post

Born in the Philadelphia area and raised in Houston by a family who was predominately employed in heavy manufacturing. Herb took a liking to factory processes and later safety compliance where he has spent the last 13 years facilitating best practices and teaching updated regulations. He is married with two children and a St Bernard named Jose. Herb is a self-described compliance geek. When he isn’t studying safety reports and regulatory interpretations he enjoys racquetball and watching his favorite football team, the Dallas Cowboys.