Circuit Breaker Lockout – Breaker Block Components – 480/600 Volt

  • Works with most 480/600V circuit breakers
  • Locks large and irregularly shaped circuit breaker switches
  • Can accommodate 2 safety padlocks
  • Permanent installation with adhesive
  • Premium quality engineering plastic alloy

More Details

  • breaker lockout device
  • Comes with 2 mounting rails and 2 blocking rods
  • Red rod keeps the switch in the off position
  • Green rod keeps the switch in the on position
  • Mounting Rails Dimensions (Yellow): 4” x 13/16” x 1-1/16” (self-adhesive)
  • Rods (Red and Green) Dimensions: 7-5/8" x 5/16” x 1/4"
  • Padlock Holes: 5/16”
  • Easy to install; no screws required
  • TRADESAFE is an American-owned and -operated company
  • 100% OSHA compliant

Like many other circuit breaker lockout devices, this one is designed to keep a circuit breaker switch in the on or off position. However, some switches are irregularly shaped or too large for the typical clamp-on breaker locks. This device is designed to efficiently block unauthorized personnel from flipping circuit breaker switches during maintenance or servicing.

Ensure the safety of your personnel by ensuring that you have the right tools that can accommodate all sorts of circuit breakers.

Permanent Installation

This circuit breaker handle lock is designed to make lockouts quick and efficient. The two mounting rails can be permanently installed on the distributor with the use of an adhesive. Make sure that the surface is clean before installing the rails.

There will be no need to set up all the components each time you need to use the circuit breaker lock. With the rails already in place, you’ll only have to position the rods. Thus, the lockout can proceed more efficiently. 

Efficient and Useful Design

Circuit breakers come in different shapes and sizes, and so do circuit breaker lockout devices. This device is made to accommodate breaker switches that may be difficult to lock out using clamp-on breaker locks.

Simply thread the green or red rod through the two rails to lock the switch in either the on or off position. Once the rod is in place, secure it with the lockout tagout lock. All these separate components work as a single circuit breaker lockout device.

Wear Resistance

Because this electrical breaker lockout is permanently installed, it’s bound to be used quite often. Even so, this device is made of high-quality materials and is built to last. It will thus be able to retain its effectiveness and durability even after countless uses.

OSHA Compliance

Compliance with the OSHA Standard for The Control of Hazardous Energy (Lockout/Tagout) (29 CFR 1910.147) is vital to the safety of every employee on site. That’s why we make sure that all of our products help workplaces remain OSHA-compliant.

Each TRADESAFE product meets all of the following requirements for lockout tagout devices, pursuant to OSHA Standard 1910.147:

  • Durable: Devices must be able to withstand exposure to the environment in which they will be used for as long as necessary.
  • Standardized: Devices used in a facility must be standardized according to color, shape, or size.
  • Substantial: Devices must be difficult to remove without the use of excessive force or techniques that are not typically used to remove the devices. They should also be able to prevent accidental removal.
  • Identifiable: Devices must be able to identify the employee who applied them.
  • Exclusive for Safety: Devices must not be used for any purpose other than controlling energy.

TRADESAFE: A Trusted USA-Based Partner in Lockout Tagout

  • TRADESAFE is a USA-based company well-versed in OSHA regulations
  • People-centered supplier of safety products
  • High-quality products made of heavy-duty and durable materials
  • Constant innovation and continuous adaptation to new standards

TRADESAFE is your partner in safety and we always keep the seriousness of that role in mind. That’s why all of our lockout tagout products are industrial-grade and meet regulatory standards. They are all ideal for use in the lockout of electrical and many other energy applications.

We don’t want to just be your supplier. We want to be your partner. For this reason, we approach things differently. Each and every day our team works to improve our products and the services we provide to the great people and businesses that put so much faith in us.

TRADESAFE is a USA-based company. This helps us stay up to date on the latest OSHA safety standards. We are inspired by the American worker and we are honored to help keep you safe from harm and hazards.


Want to contribute to our blog?